About Guy Cotten fabrics

About Guy Cotten fabrics

15th Sep 2017

Each Guy Cotten fabric its own strengths and every professional activity is specific, requiring customisation. Some have been used exclusively by Guy Cotten for decades: Nylpeche fabric, Cap-Coz fabric, etc.

All Guy Cotten fabrics have been chosen because they provide real weather protection, while remaining comfortable inside.


420 Fabric

Resistant. Double-sided coating. Fabric coated on both sides. Its weight, toughness and suppleness make it a fabric with great strengths Composition: polyester (100 g/m2). Coating: Double-sided PVC (300 g/m²). Total weight: 400/420 g m².


AQUASTAR Fabric

The Aquastar fabric is breathable. Its weight, 200 g/m², makes it a strong fabric that is very pleasant to wear for sailing activities or at the seaside.


CAP COZ Fabric

Supple and very tough. Coated on one side. A proven fabric delivering maximum comfort. The generous outer coating makes it very strong and entirely waterproof, while allowing great fl exibility. It also stands up very well to temperature variations. The interior jersey is pleasant to the touch, provides thermal insulation and reduces condensation. Composition: Polyester jersey (110 g/m2). Coating: 1 side PVC (370 g/m2). Total weight: 480 g/m2.


CLASSIC Fabric

Tear resistant. Double-sided coating. PVC coated fabric on 2 sides on backing. Extremely long-lasting. Tough and cheap. Composition: Polyester (92 g/m2). Coating: PVC (368 g/m2). Total weight: 460 g/m2.


DREMTECH+ Fabric

Heavy duty and breathable, 76.5% polyamide, 23.5% polyurethane.

1/ Central part in 3 layers:

  1. 2 layers are connected
  2. An “intelligent” non-porous molecular membrane: When body temperature rises, the membrane’s intermolecular space increases, helping moisture escape faster. Since it is not made of ordinary pores, it remains wind and waterproof. This is even the case when it is stretched considerably and subjected to the toughest wear.
  3. A microporous coating increases its resistance to wind and water even further.

2/ Very hard wearing outer fabric standing up to all sorts of hostile outdoor conditions (abrasion, tearing, etc.), protected with a high-performing water repellent and anti-stain treatment.

3/ Bonded interior lining. This saves the addition of an extra lining, making it high-performing, comfortable and long-lasting.

Technical characteristics: waterproofing: 25 m water column Moisture permeability: 5000 g/m2 in 24 hours. Below 12 RET (evaporative transfer). Total weight 294 g/m2.


FISHER Fabric

Supple. Generous coating on one side. Supple fabric with generous coating making it very resistant to oil, grease, and wear. Very tough and comfortable thanks to the interior textile. Composition: Polyester (50 g/m2). Coating:
PVC on one side 530 g/m². Total weight: 580 g/m2.


FLOTATION Foam lining

Closed-cell, non-absorbent, high density PVC foam, highly resistant to compression. Flotation is guaranteed even after extended use.


GLENTEX Fabric

Very supple. Coated on one side. The incredible fl exibility of a coated high-performing textile. Polyester (65 g/m2). PVC coating (225 g/m2). Total weight: 320 g/m2.


NYLPECHE Fabric (exclusive quality)

Highly tear resistant. Double-sided coating. Designed and perfected for industrial fi shing, this fabric has been adopted by the majority of fi shermen throughout the world. The care taken with the coating whose composition

is of high quality, explains this fabric’s excellent resistance to variations in temperatures, as well as oils and grease. The technical characteristics of the Nylpêche fabric provide completely waterproof garments second to none for their strength and suppleness. Composition: polyester (150 g/m2). Coating: PVC (Without overload) with a high quality composition (335 g/m2). Total weight: 485 g/m2.


POL 24E Fabric

Supple, soft and bi-elastic (10% Lycra) 220g/m² fleece fabric. It has great thermal properties. Dries quickly. 100% polyester. Total weight 200 g/m².


POL 100 Fabric

The “velvet” finish creates pockets of air which retain body heat. Light, warm and breathable, it is ideal for Outdoor sports. Dries quickly. 100% polyester. Total weight 200 g/m².


POL 250 Fabric

The “velvet” finish creates pockets of air which retain body heat. Thick, warm and breathable, it is ideal for Outdoor sports. Dries quickly. 100% polyester. Total weight: 250 g/m²


POL 350 Fabric

The “velvet” finish creates pockets of air which retain body heat. Dense, warm and breathable, it is ideal for Outdoor sports. Dries quickly. 100% polyester. Total weight: 350 g/m²

PVSOFT Fabric

Extremely supple and light. Coated on one side. Polyester fabric coated with PVC on one side, 265 g/m².


SOFTWEAR Fleece Fabric

Pleasant to the touch, with characteristic softness and flexibility. Ideal for day to day use. Polyester 225 g/m² and viscose 25 g/m². Total weight 250 g/m².


VISTEX Fabric

Very supple. Coated on one side. The fabric complies with EN 471 standard (High Visibility) and EN ISO 14116 index 1/5H/40 (flame-resistant). Polyester (50 g/m²), PVC coating (300 g/m²). Total weight 350 g m². The item itself has not been subjected to the EN ISO 20471 and EN ISO14116 tests.